| Cooler and further equipment |
| Oil cooler re-locating kit Ducati SS models until 1998
Re-locating kit for all models with low oil coolers.
Kit contains:
Steelbraided oil hoses with red/blue anodized fittings
Aluminium support for cooler
Flat valve cover
Assembly material (straps, screws, a.s.o.)
Scope of supply
Relocating kit mounted
| Prod.Id dk0010
205 EUR
|
| Rubber/high grade steel hose Dash 6
Series 400 hose. Oil -, fuel or air hose. Synthetic rubber (nitrile) with high-grade steel networks as pressure carriers.
Temperature range: -55 °C to +150 °C.
Inside diameter 5.56 mm
outside diameter 13.89 mm
burst pressure 420 bar
operating pressure 69 bar
bending radius 63.50 mm
Cost per meter. Please indicate the quantity for an order.
We use these hoses for our oil cooler kit dk0010. Other connection types and hoses on request. | Prod.Id dk0011
29,60 EUR
|
| Aluminum connection Dash 6 straight
Serie 800 aluminum connection with UNF thread.
Use: In connection with hose type 400 for oil -, hydraulics -, gasoline and air line.
Technical description: Anodized light alloy screw connection with UNF thread. The connections are re-usable and possess a turning reconciliation (Swivel), which makes a correcting possible after an assembly. The Cuttersystem (sleeve fitting) makes an absolutely safe connection between hose and connection.
We use these connections for our oil cooler kit dk0010. Other connection types and hoses on request. | Prod.Id dk0015
10,20 EUR
|
| Aluminum connection Dash 6 90 degree
Serie 800 aluminum connection with UNF thread.
Use: In connection with hose type 400 for oil -, hydraulics -, gasoline and air line.
Technical description: Anodized light alloy screw connection with UNF thread. The connections are re-usable and possess a turning reconciliation (Swivel), which makes a correcting possible after an assembly. The Cuttersystem (sleeve fitting) makes an absolutely safe connection between hose and connection.
We use these connections for our oil cooler kit dk0010. Other connection types and hoses on request. | Prod.Id dk0020
20,50 EUR
|
| | Water cooler Racing 748 R/RS
| Prod.Id dk0100
1.130,90 EUR
|
| | Water cooler Racing 916/996
| Prod.Id dk0101
1.233,90 EUR
|
| | Water cooler Racing 916/996 Evolution
| Prod.Id dk0102
1.542,90 EUR
|
| | Water cooler 998 S/R
| Prod.Id dk0103
1.626,40 EUR
|
| | Water cooler RAcing 998 RS
| Prod.Id dk0104
2.016,70 EUR
|
| Oil/Water cooler RAcing 999
Big water- and oil radiator. The temperature goes down about 10-15 C°Fits the two seater, S and R models.
Radiator mounted | Prod.Id dk0105
2.155 EUR
|
| | Oil/Water cooler Racing 999 RS
Water cooler
Oil cooler
Radiator unit like used on Bayliss Race Bike. Some changes on fairing and holders are necessary. Recommended for experts with the necessary knowledge. Kit does not contain any hoses. | Prod.Id dk0106
On Demand
|
| Water cooling 1098-1198
This article you can fit with all original part's (hose kit, bolt, etc).
batterie is same position , simplest installing !!! no mods required !!!
temp goes 10 degree celsius down !! delivery time approx 14 days.
Picture 1
Picture 2 | Prod.Id dk0107
985 EUR
|
| 1098 SBK radiator kit complete
Complete radiator kit incl. silicone hoses and battery holder. The battery must be changed to the right side. Please ask for delivery time. | Prod.Id dk0110
2.550 EUR
|
