| Clutchparts |
| Clutchhousing CNC
CNC machined clutch housing. Top quality ergal-alloy hardcoated.
Long lasting lightwight! Weight 430 Gramm.
Reduces clutch noises!
| Prod.Id 10802
275 EUR
|
| Clutch drum CNC
Ergal-Alloy clutch drum. Total weight 600 Gramm!
Perfekt finish and quality.
For all dry clutches with leftside slave-cylinder. Please indicate model year when ordering.
| Prod.Id 10803
289 EUR
|
| working on clutch preasure plate to reduce forces,ex
In exchange. 30 % less hand force. Only for use with an aloy clutch drum. Please send us yours to work on. Cups for springs (order no. 4312) and clutch drum (order no. 431) are needed. | Prod.Id 4311
50 EUR
|
| Clutch pressure plate CNC
Very nice cnc machined clutch pressure plates. Available in blue, red, black, gold or aloy . Please indicate coloure when ordering. Delivery takes place incl. bearing. Weight with bearing 254 gram.
Picture
| Prod.Id 4312
99 EUR
|
| 6 cups for clutch preasure plate
Needed for reducing the hand forces. See item number 4311.
| Prod.Id 4313
49 EUR
|
| Clutch preasure plate, reduced forces
Super light weight, cnc machined, pressure plate for reducing handforces. Delivery inkl. bearing and cups. Only for use with cnc clutch part nr. 10803. Handforce reducing 25 % !!!!! | Prod.Id 4314
169 EUR
|
| Clutch springs per set, different colours
6 springs. Available in
red
blue or ´
silver
Please indicate length and model/model year when ordering. 38mm or 40mm. For all models with dry clutch system.
| Prod.Id 4315
25,75 EUR
|
| Spring plates for clutch
6 plates in gold, red, silver, blue, black or titanium colore. Please indicate when ordering. | Prod.Id 4317
35 EUR
|
| | Spring plates for clutch 1098
Special for 1098 models. 6 plates in gold, red, silver, blue, black or titanium colore. Please indicate when ordering. | Prod.Id 4317a
35 EUR
|
| | Spring plates for clutch Hypermotard + Monster 1100
Special for Hypermotard and Monster 1100 models. 6 plates in gold, red, silver, blue, black or titanium colore. Please indicate when ordering. | Prod.Id 4317b
35 EUR
|
| Performance Parts Clutch slave cylinder
Reduces handforce about 25%! CNC machined. Available for all Ducati
models with dry clutch system. Please indicate model and modelyear and one of the following coloures when ordering:
Silver
Gold
Red
Blue
Black
Titanium | Prod.Id 4318
119 EUR
|
| Clutch Slave Cylinder
Reduces handforce about 30%! 30mm piston diameter. CNC machined. Available for all Ducati models with dry clutch system. The scope of supply contains:
2 x alloy gasket rings
1 x Oring
3 x mounting screw
With this complex milled cylinders the push rod is always completely covered.
Available in silver, black, red and gold. Please indicate colore and model year when ordering.
| Prod.Id 4318b
115 EUR
|
| TSS clutch slave cylinder
Newly designed slave cylinder with large bore, which improves clutch modulation and reduces lever effort by 25%.
Many advanced details give this TSS part an advantage over the competition.
CNC made from Ergal 7075 with a smooth hard anodized surface reducing friction on all moving parts.
The piston is kept under preload by the internal spring.
There are two O-rings on piston to stabilize piston in the bore. It eliminates alloy-to-alloy contact, and improves overall durability.
The double seal increases sealing durability.
The removable cap is fitted to the cylinder, and is fully sealed with a standart O-ring to the crankcase.
No more dust or dirt on push rod, no more oil leaking thru push rod O-rings
Coloures: black, red, gold, blue and silver colour
Basic application for all Ducatis from 2001. For older models with clutch slave cylinder on left side (all 4-valves engines and 900cc 2-valves engines from 1991) an addtional spacer allows the use of the older short push rod from the early models.
| Prod.Id 4318c
109 EUR
|
| Folding clutch lever 749/999/S4RS
Folding clutch lever for 749, 999 and S4RS brake pumps with or without Ducati logo (please indicate when ordering!). The lever is adjustable.
Lever mounted | Prod.Id 4319
89 EUR
|
| Clutch housing cover milled out
To the better ventilation of the clutch.
Supply takes place in exchange. Please send us your cover! Usually we have original coloured covers in stock. Please indicate the version you prefer. | Prod.Id 7818
89 EUR
|
| Magnesium clutch housing
Magnesium clutch housing, Magoxid coated, paintable. Fits all Ducatis with dry clutch system and left hand operating clutch slave. Weight only 748 gram! Scope of supply see picture. | Prod.Id 7818mag
429 EUR
|
