| Handlebars |
| MR Handlebars Version 1, low
CNC Aloy handlebars pair.
Full adjustable!!!
Anodised TÜV aproved.
Colours:Silver oder Titancolour.
Available diameters: 50,51,53,54mm (others on demand).
Please specify colour and diameter.
| Prod.Id 441
225 EUR
|
| MR Handlebars. Version 2, high
MR CNC handlebar pair high version.
(High like SS 91-97 handlebars!)
Also to rise handlebars for modells like 748-916-996. Available in silver or titanium coloure. Please note diameter (50 to 54mm) and coloure.
| Prod.Id 442
245 EUR
|
| Alloy handlebar low
Handlebar pair alloy. Available diameters: 50, 51, 53, 54mm.
Including technical certificate.Cheap handlebar ! Please indicate diamter when ordering. | Prod.Id 446
135 EUR
|
| Alloy handlebars high
Handlebar pair like item 446 but in a high version like the SS 91-97 original handlebars. Delivery includes a technical certificate.Cheap Handlebars ! Please indicate diamter when ordering. | Prod.Id 447
165 EUR
|
| Handlebar 750-900 SSi.e./748-998
Aluminum handlebar as substitute to the original. Ideal as reserve for racing!Total length 27,5 cm. Diameter 22 mm. Weight 143 Gramm.
Price per piece.
| Prod.Id 448
25 EUR
|
| Carbonfiber handlebar tubes
Handlebar tube in carbon quality. Weigth approx. 77 gram, length 29 cm, outer diamter 22 mm, inner diamter approx 16 mm. Racing part. Not for legal street use. Fits the models 748/916/996.
Price for one piece.
| Prod.Id 449
69 EUR
|
| CNC handlebar, low
CNC machined, alloy handlebar, low version. 4° angled. Please note diameter when ordering.
| Prod.Id d46
195 EUR
|
| CNC handlebar, high
CNC maschined alloy handlebar. High version, like SS models till year 98. the handlebar is 4° angled. No fairing modification nessesary. Please note diameter!
| Prod.Id d47
195 EUR
|
| Ducati SS i.e. raised handlebar
The handlebar pipe is bolted directly to the clip and installed above the fork bridge. Thus the handlebar pipe is higher and further attached to the driver. Additionally by the smaller offset a more relaxed position is possible. The handlebar is natural color anodized and ready to be installed with all screws. Fits all injection Supersport models with modifying the fairing or hoses. | Prod.Id d471
249 EUR
|
| Raised handlebars 749/999 models
Particularly developed for the 749 and 999 models starting from model year 2005. Around approx. 40 mm further upward. The original optics remains, since no other parts of the change are concerned. Inclusive german TÜV appraisal. | Prod.Id d472
219 EUR
|
| Raised handlebars Ducati 848/1098
Particularly developed for the 848 and 1098. The grasp position is 30mm higher opposite the original. With conical high-grade steel screws and positioning bores in the tubes.
The original optics of the motorcycle remains, since no fairing parts are shortened.
A TÜV certificate is contained in the scope of supply.
Handlebar mounted
Note!
When assembling the steering stop (left handlebar) must be limited on one side to reach the highest possible handlebar position. Steering wheel lock then only to the left hit usably.
Available in natural alloy colore or black anodized! Please indicate when ordering!
| Prod.Id d473
219 EUR
|
| PP Clip-on handlebars Race Black
Like pp01s but with black anodized clamps. Price for a set, both sides. Please indicate the clamp diameter when ordering. | Prod.Id pp01b
145 EUR
|
| PP Clip-on handlebars Race Silver
Alloy Ergal clip-on handelbars from PP. Weight per side approx. 300 gram. The handlebar tubes can be changed quick and easily without removing the upper triple clamp. Available with the diameters 41,43,45,46,48,50,51,53,54 and 56mm. Please indicate when ordering! Specified for race use only! Not certified for road traffic! Price per set. | Prod.Id pp01s
139 EUR
|
| Handlebar tube for PP handlebar Race
Alloy handlebar tube for PP handlebar Race. | Prod.Id pp02
21 EUR
|
