[view shoppingbasket] · Page back (Carbon Parts Hypermotard) · Page forward (Seats, seatbodys and seatcovers)

Fairing- and Carbon Parts Ducati 848/1098/1198
	Vented Sprocket Cover Carbon Shiny surface. Holes with aluminum inserts.	Prod.Id 014d1 69 EUR
	License plate holder Suitable for the original indicators or small indicators (Kellermann e.g.)	Prod.Id 021d1 139 EUR
	Dashboard cover Cover for the original instrument of the models 848 and 1098. Easy mounting with industrial tape (included in the scope of supply).	Prod.Id 022D1 79 EUR
	Front fairing Carbon front fairing. Street version for headlamp use.	Prod.Id 125 410,25 EUR
	Front fender	Prod.Id 1474 169,90 EUR
	Heel Guards Carbon fiber heel guards. Price per set, both sides. Shiny surface.	Prod.Id 208 124,90 EUR
	Mono Seatbody Mono seat with integrated exhaust heat protector.	Prod.Id 8402 552 EUR
	Racing rear seat selfsupporting 848-1098 Carbon rear seat, selfsupporting. Two cm higher seat position. As used by Chris Zeiser in the IDM. Also available in original seat position. Please indicate when ordering. Weight is 2,1 Kg !! YES 2,1 KG !! That is 7,5 kg less against the standart parts !! Body with paintable surface. Mounting parts carbon fiber Prepreg. Delivery time approx. 10 days. Racing part! Not for legal road use because mostly used as racing part the optic is not perfect , but for leightweigt enthusiasts and RACERS a MUST !! Also the Fuel tank holder bracket is in Carbon includet !! The mounting points are like standart ,fitting is easy installing ! Pic 1 Pic 2 Pic 3 holder	Prod.Id 8403 1.490 EUR
	Carbon Cockpit Cover Design and mounting like the original part. Perfect finish!	Prod.Id aa0011098 89 EUR
	Carbon Gas Tank Carbon/Kevlar gas tank suitable for the 848 and 1098/1098R models. Weight is 6,8 lbs. 6,3 gallons capacity. Available with rapid lock filler cap or lockable filler cap. Please indicate when ordering. All original parts can be re-used.	Prod.Id cft1098 1.499 EUR
	Carbon fuel tank 18,4 Liter Carbon fiber fuel tank for the Ducati models 848/1098/1198. Weight 2,5 Kg, 18,4 liter. Kevlar reinforced from inside! OEM replacement. Only for race use!	Prod.Id cft1098pf 1.199 EUR
	Carbon fuel tank original size Carbon/Kevlar gas tank suitable for the 848 and 1098/1098R models. Weight is 6,8 lbs. All original parts will be re-used. Picture	Prod.Id cft1098std 1.449 EUR
	Frame covers carbon Carbon frame covers for 1098 models. Price for left and right side. Mounting with double-sided adhesive tape. Not contained in the scope of supply.	Prod.Id cms0010 199 EUR
	Cover for genrator and waterpump Set, 2 parts. Fits 848/1098/1198 models.	Prod.Id cms109801 89 EUR
	Carbon cover right engine housing 1098 Suits 1098/1098R/1198 models. Not 848 models! The cover is not for caps with the increasing for the lettering: Ducati!	Prod.Id cms109802 65 EUR
	Cylinderhead covers Approx. 120 Gr. lightweight covers for the cylinder heads. 100 Gr. lighter as the Magnesium version! Scope of supply contains 2 pcs, for both heads.	Prod.Id cms109803 559 EUR
	Carbon fairing Complete fairing kit. Includes the front fairing, left and right side and the belly pan. Weight excl. windscreen and mounting parts 1,65Kg! Surface is semi-gloss. Carbon fiber sight quality. On demand we can deliver the parts clear coated (surcharge 200 €). Original fairing arrangement Ram-air covers integrated in the upper fairing Available as street or race version Belly pan available as street or race version (20mm lower, closed and without outcut for sidestand and splashguard) Carbon sight quality and reinforced with kevlar from the backside Very flexible and resistant Please indicate the version you want. All parts are also available seperately. Picture 1 Picture 2 Picture 3 Picture 4 Picture 4a Picture 5 Picture 5a Picture 6 Picture 6a Picture 7 Picture 7a Picture 7b	Prod.Id cms1098rac 1.280 EUR
	Right side housing cover for 848 models Right side.	Prod.Id cms84801 169 EUR
	Carbon Airchannel Covers Left/Right Carbon covers for the left and right air channel. Cover mounted	Prod.Id du001 190 EUR
	Lower fairing left & right Optical highlight! Very good carbon quality and very accurately fitting. Easy exchange to the oem parts. Price for left and right side.	Prod.Id du004 399 EUR
	Carbon Rear Seat Cover	Prod.Id du007 90 EUR
	Carbon Side Covers Left/Right Detail	Prod.Id du009 279 EUR
	Carbon Swingarm Protector	Prod.Id du025 179 EUR
	Carbon Heel Guards Very stable and stiff version. The mounting holes are with aluminum inserts. Scope of supply contains stainless steel screws. Delivery as a set for left and right side.	Prod.Id fs0011098 99 EUR
	Carbon heat shield Design and mounting like the original part. Very light! Best quality!	Prod.Id hs0011098 83 EUR
	Carbon Clutch Cover Open New design with 1098 S 3D decal. Very stable version. Top quality!	Prod.Id kd0011098 129 EUR
	Carbon Clutch Cover Half Open Liek above but only half open.	Prod.Id kd0021098 129 EUR
	Carbon holding plate for throttle body 848/1098/1198 Throttle body holder made of carbon fiber. Suitable for 848/1098, 1098S, 1098R, 1198 and 1198S. Just exchange against the enormously heavy original part . Saves over 1 kg weight! Infos 1. The stepper motor is dismantled. This engine is only responsible for the air regulation in the exhaust measuring cycle. Instead of using this motor the air screws should be opened about 2 1/2 turns to ensure a good cold start. 2. To the durability. The carbon plate is flat, however from 2,5mm prepreg carbon, which is actually far oversized for the purpose. Additionally the whole injection unit supports itself also still over the air box, and/or over the clips at the cylinder head. The plate is used since already 2 years in the IDM racing and it never gave thereby a problem with stability. Detail picture	Prod.Id khpdkk1098 109 EUR
	Chain Guard Simple assembly The chain guard is a protective cover and is placed on the genuine chain protection (which can not be replaced) Fastening with a screw, already in the swingarm, and the supplied 3M tape. The chain guard protection is longer than the original, and thus offers better protection	Prod.Id ks0011098 72 EUR
	Carbon Air Intakes Rear Seat Very fine optic. Mounting with assembly adhesive (in the scope of supply). The original racing net is re-used. Price for a set.	Prod.Id le0011098 89 EUR
	GFK Fairing Kit Race Glasfiber fairing kit Race. Complete with front with air intakes, left and right side, seat with lower cover and belly pan. Good, simple quality. Not drilled. Fits for the sizes of the standard exhaust system.	Prod.Id msf1098rac 599 EUR
	Carbon Ram Air Channels Set of carbon fiber air box channels. Prepreg autoclave parts. Guarantees the highest firmness with minimum weight. The channels fit on the original air box and the air intakes of the original fairing. They captivate by a large, maximally possible diameter, as well as flowoptimized geometry. Results in an increase in the middle and upper speed range! At the engine no further changes must be made after the assembly. The on-board electronics regulates the injection automatically.	Prod.Id ra001 499 EUR
	Carbon Ram Air Channels, suitable for carbon airbox Like item # ra001 but made to fit the big volume carbon fiber airbox.	Prod.Id ra0010 469 EUR
	Carbon Front Sprocket Cover Screw connection points with aluminum inserts.	Prod.Id ra0011098 62 EUR
	Carbon Rear Fender Best Quality! Easy mounting. Comes with screws. Does not fit when using 70mm exhaust systems!	Prod.Id ra0021098 179 EUR
	Carbon Rear Fender 70mm Termignoni Easy mounting. Inclusive mounting parts.	Prod.Id ra0041098 179 EUR
	Air Ducts Covers opticay perfect easy mounting incl. stainless steel screws	Prod.Id ra0051098 329 EUR
	Sprocket guard open with aluminium bushings easy mounting	Prod.Id ra0061098 62 EUR
	Carbon Rear Seat Cover Easy mounting with assembly adhesive (incl.). With 3D Doming-Sticker.	Prod.Id sp0011098 65 EUR
	Carbon Fuel Tank Protector Easy mounting by 3M tape (incl.). With 3D Domin-Sticker.	Prod.Id tp0011098 69 EUR
	Fairing insert/oil cooler cover Shiny surface.	Prod.Id ve012d1098 169,90 EUR
	Timing Belt Covers Shape and mounting like the oem part. The original air filter remains. High quality!	Prod.Id za0011098 249 EUR
	Carbon Key Guard Cover Covers exactly the rubber part. High quality.	Prod.Id zs0011098 79 EUR

[view shoppingbasket] · Page back (Carbon Parts Hypermotard) · Page forward (Seats, seatbodys and seatcovers)