| Special tools for Ducati |
| Precision measuring set
This precision measuring set includes an electronic digital caliper, two measuring spikes for 2-valve engine and 4-valve engine and serves for the measuring of the valve opener cap as well as the valve closing shims. | Prod.Id 10101
134,90 EUR
|
| Rocker arm extractor tool
| Prod.Id 10109
39 EUR
|
| Crankshaft turning tool for SS, Pantah, 4V - master
The crankshaft can be turned with these tools | Prod.Id 10116
48 EUR
|
| Engine stand
Suitably for almost all Ducati, from Pantah till 1198 | Prod.Id 10117
169 EUR
|
| Cam shaft center tool set Testastretta
The horizontal piston is to be brought in TDC. The piston has to be in the compression stroke. In this position the cam shaft center tool are positioned with mounted/not mounted timing belts. | Prod.Id 10121
188 EUR
|
| Tool set for Timing belt sprocket - cam shaft 750-900
This set exists of the timing belt sprocket hold key and a special nut. The timing belt sprocket hold key is put with both pencils in the timing belt sprocket. The bow nut is solved with the special nut which disposes of a ½-inch connection.
Suitable for all 750-900 models.
This tool is reproduktion of the ducati original oem tool number d19.
Quality is the same but price 40 % less. | Prod.Id 10122
78 EUR
|
| Timing belt sprocket hold key
| Prod.Id 10122a
37,90 EUR
|
| Generator cover pull-off tool 2V
After removing the small cover of the generator cover the pull-off tool is fastened in both tapped holes of the small cover. About the spindle the cover is solved. | Prod.Id 10123
39,60 EUR
|
| Generator cover pull-off tool 4V
After removing the small cover of the generator cover the pull-off tool is fastened in both tapped holes of the small cover. About the spindle the cover is solved. | Prod.Id 10124
44,90 EUR
|
| Pin wrench / 4-hole - headset nut
Adapter AF21 | Prod.Id 10131
47,80 EUR
|
| Pin wrench / 4-hole - Öhlins fork
Adapter AF21 | Prod.Id 10132
55 EUR
|
| Pin wrench / 4-hole - Öhlins fork
Adapter 1/2 inch | Prod.Id 10133
61 EUR
|
| Cam shaft center tool set 1098
| Prod.Id 10140
239 EUR
|
| Clutch wrench 12 and 48 teeth
Holding tool for all dry clutch systems with 12 or 48 teeth. With this tool you can block all clutch centers and baskets!!!
if aftermarket or stock parts ,simply all !!!
as STM;MB2,MPL,TSS, stock aso. )
Pic 1
Pic 2
| Prod.Id 887130147
94 EUR
|
| Generator holding wrench old generator types
All models till 97. | Prod.Id 887130710
188 EUR
|
| Generator holding wrench new generator types
All models from 98 . | Prod.Id 887132101
299 EUR
|
| Valve measure gauge with holder 4V
This valve measure gauge is neccasary for all valve adjustments/cam degreeing from
851/888 to 748/916 up to 996 and 996 SPS .The gauge is inclusive 30 mm stroke.
(with 10 mm stroke gauge you can adjust valves but not cam degreeing) | Prod.Id d11
159 EUR
|
| Timing tool Testastretta engines
Tool for fine-adjusting. Contains measure gauge with 30mm stroke, fork, black connecting tube and holder.
scope of supply | Prod.Id d110
184,90 EUR
|
| Measuring stand for valve shims Ducati
Durable base with stand and 10er dial gauge. Measure adaptors must be ordered sepeartly. | Prod.Id d115
129 EUR
|
| Conical axle for tire balancing 748-996
Universal balancing axle. Useable for diameters from 10-32mm. | Prod.Id d116
39,90 EUR
|
| Adaptor for axle 748-996
Adaptor for ducati wheels 748-996. | Prod.Id d1161
99,90 EUR
|
| Super short Imbus 4-5-6
Wrench 69 Euro
Imbus-nut each 19,90 Euro
Please indicate the parts you want while ordering. | Prod.Id d117
See Description
|
| Rocker Pin Puller
For all models. | Prod.Id d1181
143,20 EUR
|
| Belt control gauge Ducati 4 V
Gauge for controlling belt tension at Ducati 4 valve models. For all 748-996 and all Testa Stretta engines suitable .Inclusive manual. Original Ducati tool. Normal price is more then 400 Euro! | Prod.Id d1184
349 EUR
|
| Adapter kit for 2 valve engines
Adapting kit for the special tool d1184 for measuring the tension on 2 valve models. | Prod.Id d11841
39,95 EUR
|
| Holder for gauge to the heads
For the models 748/888/851/916/996.
| Prod.Id d12
59,90 EUR
|
| Holder for measure gauge Testastretta cylinderheads
Measure gauge holder, alumnium cnc milled for Testastretta heads. | Prod.Id d121
59,90 EUR
|
| 10mm gauge
10mm gauge, suitably to the items d12 and d121 | Prod.Id d121a
46,50 EUR
|
| 30mm gauge
30mm gauge, suitable to the items d12 and d121 | Prod.Id d121b
79 EUR
|
| Fork 4V
Fork with connecting tube, suitable to the items d121a and d121b | Prod.Id d121c
15,90 EUR
|
| Fork Testastretta
Fork with connecting tube, suitable to the items d121a and d121b | Prod.Id d121d
15,90 EUR
|
| Degree wheel
Timing wheel and handle allows you to rotate your crankshaft and check camshaft timing for all Ducati Twins. | Prod.Id d14
190 EUR
|
| T.D.C. finder for 748-851-996
For ducati 4 valve models 748-851-888-916-996. M12 thread.Inclusive 10 mm gauge. | Prod.Id d15
99,90 EUR
|
| T.D.C. finder with 10mm gauge Testastretta
Measure gauge and adapting tube for Testastretta heads.Inclusive 10 mm gauge. | Prod.Id d151
99,90 EUR
|
| Measure adaptor for 2V shims
For opening and closing shims. 8mm valve stem.
All Desmo parallel twins, Pantah and Paso
All Bevel V2 and 1 cylinder models
2 valve belt models 350/400/500/600/620/750/800/900
Not for the 1000cc 2V engines! For this models please use tool d17. | Prod.Id d16
24,90 EUR
|
| Measure adaptor for 4V shims/1000-2V
For opening and closing shims 4 Valve and all 2 V models up from 2007 with 7mm valve stem.
4 v models 748/851/888/916/996/998
3 v models
Not for the models 748S/R, 749S/R, 998R and 999R.
| Prod.Id d17
25,60 EUR
|
| Rear suspension adjustment tool for 748/916/996
Detailbild | Prod.Id d18
149 EUR
|
| Rear suspension adjustment tool for 749/999
Detailbild | Prod.Id d181
149 EUR
|
| Rear suspension adjustment tool for 848/1098/1198
Detailbild | Prod.Id d182
149 EUR
|
| Timing pulley wheel retaining wrench plus nut 600-750-900-851-996
For desambling and mounting the camwheel nuts. For all models
600-750-900-748-851-996.Original Ducati Tool ! under our number 10122 we have the same tool 40 % less.
| Prod.Id d19
119,90 EUR
|
| Camwheel holding tool for Testastretta engines
Holder for blocking the camshaft wheels at the Testastretta engines 749/848/998/999/1098/1198. | Prod.Id d20
69,90 EUR
|
| Tool for cam shaft nuts Testastretta engines
For the models 749/848/998/999/1098/1198. | Prod.Id d21
39,90 EUR
|
| Tool for cam shaft nuts Desmoquattro engines
| Prod.Id d22
39,90 EUR
|
| Tool for crankshaft nut
specially long nut to solve / tighten to the crankshaft nut. Suitable for all Ducati models up from Pantah 500. | Prod.Id d23
41,35 EUR
|
| Cylinder head wrench
For tightening the cylinder head nuts. | Prod.Id d25
249 EUR
|
| Special tool rear wheel nut 748-998 left side
43mm | Prod.Id d26
45 EUR
|
| Double nut Ducati 1098 SW55/SW30
Special tool for the front and rear wheel nut at the Ducati 1098 models. 2 in 1 tool! 1/2" connection.
| Prod.Id d271
59,90 EUR
|
| Special tool rear wheel nuts Ducati mono swingarm models 748-998 2 in 1
One tool for both nuts. 46mm and 41mm. 1/2" connection. Made from alloy.
Also fit on S2R. | Prod.Id d272
59,90 EUR
|
| Short hook spanner rear axle 748-998
Also fit on S2R. | Prod.Id dhs1
24,90 EUR
|
| Long hook spanner rear axle straight 748-998
| Prod.Id dhs2
35 EUR
|
| Hook spanner steering head eccenter 748-999
For the models 748/749/916/996/998/999. | Prod.Id dhs3
20 EUR
|
| Set of hook spanners spring tension showa rear damper 748-998
| Prod.Id dhs4
62 EUR
|
| Set of hook spanners spring tension showa rear damper 749/999
| Prod.Id dhs5
62 EUR
|
| Hook spanner long, straight for rear axle Monster S4R
| Prod.Id dhs6
35 EUR
|
| Hooked spanner rear wheel excenter 1098
| Prod.Id dhs7
35 EUR
|
| Spring adjuster Öhlins rear shocks
From aluminum manufactured spring shim for Öhlins shock struts. Functioned purely mechanically. Screw on simply. The spring temper is adjustable with this ring by hand. For the assistance the lever can be used. The ring becomes secured with set-screws. Simply however effectively! Scope of supply: Lever and ring.
Picture adjuster mounted | Prod.Id duw01
49,90 EUR
|
| | Spring adjuster Öhlins damper 1098
From aluminum manufactured spring shim for Öhlins shock struts of the Ducati 1098 models (outer diameter 51mm). Functioned purely mechanically. Screw on simply. The spring temper is adjustable with this ring by hand. For the assistance the lever can be used. The ring becomes secured with set-screws. Simply however effectively! Scope of supply: Lever and ring.
| Prod.Id duw02
49,90 EUR
|
| Degree Wheel
Manufactured from .052 inch thick aluminum with a 6 3/4 inch outside diameter and a 6mm center hole
Black anodized finish with easy to read numbers
Check or set ignition and/or cam timing
May be used on 2 & 4-stroke engines | Prod.Id mp950442
24,90 EUR
|
| Assortment 2V closing shims
Assortment 2 valve engine closing shims.
From 6,20-7,20
1 of each size = 21 pieces.
For all Ducati 2 V engines with 8mm valve stem. | Prod.Id vs2vclose
199 EUR
|
| Assortment 2V opening shims
Assortment 2 valve engines opening caps.
From 2,55-3,80
1 of each size = 26 pieces.
For all 2 valve Ducati engines with 8mm valve stem. | Prod.Id vs2vopen
129 EUR
|
| Assortment 4V/1000 DS 2V closing shims
4 Valve engine closing shims.
Two pieces per size = 38 pieces.
From 2,70 - 3,60
For all models with 7mm valve stem (all 4 V and 1000 DS 2V, not RS models!)
| Prod.Id vs4vclose
339 EUR
|
| Assortment 4V/1000 DS/2V opening shims
4 valve/1000-2V engine opening shims.
Two pieces per size = 44 pieces
From 2,35-3,40
For all 4 V models and 2V 1000 DS with 7mm valve stem. | Prod.Id vs4vopen
259 EUR
|
