| Chassis- and frame parts |
| Fork adjusters Öhlins
Fork adjusters for Öhlins front forks with 22mm screw. Delivery as a set, 2 pieces. Fixed with a set-screw. Available in red, gold, black, silver, blue or titanium. Please indicate coloure when ordering. | Prod.Id 310oe
40 EUR
|
| Fork adjuster Showa
Fork adjusters for Showa front forks with 22mm screw. Delivery as a set, 2 pieces. Fixed with a set-screw. Available in red, gold, black, silver, blue or titanium. Please indicate coloure when ordering. | Prod.Id 310s
40 EUR
|
| WP Forksprings
Sensitiv feedback and best progeression.
Front fork tuning for better ground control.
Please indicate model and year of construction when ordering. | Prod.Id 311
99 EUR
|
| Steering head CNC 748-996 in exchange
Steering head CNC maschined and glass blasted in excange for Ducati 748-916-996
Send your original!
| Prod.Id 328
135 EUR
|
| Steering head cover carbon 748-998
| Prod.Id 3291
36,60 EUR
|
| Steering head cover carbon SS i.e.
Two piece. at the time not abvailable. | Prod.Id 3292
On Demand
|
| Alloy steering shaft tube for race 748-916-996-998/749-999/848-1098-1198
CNC-manufactured steering shaft tube made of alloy ERGAL. Only for racing. High weight savings: the pipe weigh only 208 grammes, compared with original steel pipe approx. 465 grammes.For following bikes 748-91-996-998/749-999/1098-1198/S2R/S4R/900SSie/. Please indicate you model!
steering shaft tube with steeringhead
Does not fit 749 R models!
| Prod.Id 3293
128 EUR
|
| | 748 RS F02 frame
Original Factory quality, made by Pierobon. Please ask for delivery times! | Prod.Id cr748f02
On Demand
|
| | 996 RS F01 frame
Original Factory quality, made by Pierobon. Please ask for delivery times! | Prod.Id cr996f01
On Demand
|
| 998 RS F02 frame
Original Factory quality, made by Pierobon. Please ask for delivery times! | Prod.Id cr998f02
On Demand
|
| | 999 RS F05 frame
Original Factory quality, made by Pierobon. Please ask for delivery times! | Prod.Id cr999f05
On Demand
|
| | Swingarm for 999 F04
Please ask for delivery time! | Prod.Id crs999f04
On Demand
|
| Centrical plate for swingarm fulcrum
Made of alloy, especially for 749 R and 999 R.
Changes the swinging fulcrum for optimum traction of the rear wheel.
Price for 2 pieces.
| Prod.Id d48
49,80 EUR
|
| Titanium Nuts Front- and Rear Wheel 748-998 WAVE
Set titanium nuts for front and rear wheels. WAVE-design.
| Prod.Id d49
145 EUR
|
| Titanium Nuts Front- and Rear Wheel 748-998
Like item d49 but in standard design.
| Prod.Id d491
145 EUR
|
| Rearwheel nuts alloy for all mono swingarms
Consists of left and right side. Fits the models 748/916/996/998/Multistrada/S4R and S2R.
Right side nut | Prod.Id d50
99,90 EUR
|
| Rear wheel nut alloy 749/999
Aluminum rear wheel nut for the Ducati models 749/999. Weigth 21 gram. | Prod.Id d500
14,90 EUR
|
| Aloy axle 748-998, i.e. models, Hyper and Multi, Desmosedici
Aluminium front axle for the models 748/916/996/998/SS and M i.e. models, Hypermotard, Multistrada (only model year 2004!) and Desmosedici.
Weight aluminium axle = 150 Gramm
Original = 342 Gramm
Safed weight = 192 Gramm
Scope of supply includes washer and nut. | Prod.Id d501
89,90 EUR
|
| Alloy front axle 749/999/Multistrada 1000
Very nice machined front axle for the Ducati models 749/999/Multistrada 1000. Made from aluminium 7075. Delivery includes bush and nut. Total weight 188 gram!
For race use only! | Prod.Id d502
99,90 EUR
|
| Steeringhead adjustable
In the wake changeable fork bridges from the full CNC milled. All 748-999 models. Delivery time approx. 4 to 6 weeks. We can realize special wishes. Please contact us for more informations. | Prod.Id d504
On Demand
|
| Racing fairing support 749/999
Aluminum fairing support"Race" for the models 749/999. weight only approx. 430 Gramm. Finest handmade quality!
Fairing support mounted | Prod.Id d521
249 EUR
|
| Front Fairing Support Race 749/999 till 2004
For the models till 2004. | Prod.Id d521a
155 EUR
|
| | Front Fairing Support Race 749/999 2005/2006
For the model years 2005 and 2006. | Prod.Id d521b
155 EUR
|
| Alloy fairing support Ducati 1000 SS i.e. models
Made from alloy. Stable execution. Weight 500 gr. To use with the original instruments. Racing.Lights are not possible !
| Prod.Id d522
155 EUR
|
| Alloy front fairing support 848/1098/1198
Fairing and instrument holder for track use in combination with no-lamps fairings. Available for 848, 1098, 1098 R and 1198. | Prod.Id d523
155 EUR
|
| Aluminium fairing support Race 848/1098/1198
Aluminium, black colored. | Prod.Id d524
169 EUR
|
| Aluminium fairing support Race 1098 R
Aluminium, black colore, for Ducati 1098 R models. | Prod.Id d525
169 EUR
|
| Alloy Rearframe 748/916/996/998R
Alloy rearframe Ducati 748/916/996/998R. | Prod.Id d53
360 EUR
|
| Alloy rear frame Ducati 749/999
Alloy rear frame suitable for Biposto models for converting to Monoposto seatbody or as an replacement for the original Monoposto rear frames. Very good quality. Weight approx. 1200 gr.
Rear frame mounted on a 999 Biposto from 2003
| Prod.Id d54
399 EUR
|
| Alloy Subframe Ducati 848/1098
| Prod.Id d540
399 EUR
|
| Tie rod linkage
All models ! Very simple to adjust. Just loose 2 M6 bolts and adjust bike high. Fully CNC build from billet alloy 7075.
For MV Agusta, Ducati 748, 916, 996, 998, 749, 999, 848, 1098, 1198, Hypermotard. All versions. For racing swingarm, normal swingarm and racing linkage.
Please indicate the length you need:
145 - 175 mm
225 - 255 mm
260 - 290 mm
price per piece | Prod.Id d5411
298 EUR
|
| | Slidertube chrom-coated
Frontfork slider tubes. For accident repairs.
Much cheaper than original spareparts!
Chromecoated and TÜV aproved.
Please indicate model, year and fork type when ordering.
Price per piece. | Prod.Id d63c
139 EUR
|
| Slidertube titanium-nitrit coated
Slidertubes Titan-Nitrit coatet, goldcolored.
Please indicate model, year and fork type when ordering.
Price per piece.
| Prod.Id d63t
249 EUR
|
| Titannium-nitrite coating
Titanium-nitrite coating for fork tubes, gold colore. Results a very hard surface and better riding performance. | Prod.Id d67t
325 EUR
|
| | Carbon-Nitrit coating
Carbon-nitrit fork tube coating for still more performance. For race use only. | Prod.Id d68k
398 EUR
|
| Fork kit Showa 1098
Front fork kit for Showa forks of the models 1098. Consists of:
Compression- and traction stage pistons
Midspeedvalve
New modulating needle
New fork springs
Chris Zaiser used this kit in a 1098R in the IDM and optimised it in many testrides.
The setting is adequate for road and track. The listed parts will be replaced. The compression phase and traction phase are co-ordinated with the driver.
We can also do the mounting of this kit for 125 €. Please send us your fork legs. Delivery time is approx. 10 days. | Prod.Id hhgk1098
595 EUR
|
| Fork kit Öhlins 1098S / 1098R
Front fork kit for Öhlins forks of the models 1098S and 1098R. Consists of:
Compression- and traction stage pistons
Midspeedvalve
New modulating needle
New fork springs
Chris Zaiser used this kit in a 1098R in the IDM and optimised it in many testrides.
The setting is adequate for road and track. The listed parts will be replaced. The compression phase and traction phase are co-ordinated with the driver.
We can also do the mounting of this kit for 125 €. Please send us your fork legs. Delivery time is approx. 10 days. | Prod.Id hhgk1098sr
695 EUR
|
| | Adjusting rear damper 1098 and 1098 S
New hydraulic adjustment with Top Out spring kit and individual spring. | Prod.Id hhrd1
328 EUR
|
| | Adjusting rear damper 1098 and 1098 S with hydraulic spring preload
Like hhrd1 but additionally with hydraulic spring preload. | Prod.Id hhrd2
498 EUR
|
| | Adjusting rear damper 1098R TTX
TTX-rear damper revision incl. new individual spring. | Prod.Id hhrd3
328 EUR
|
| | Adjusting rear damper 1098R TTX with hydraulic spring preload
Like hhrd3 but additionally with hydraulic spring preload. | Prod.Id hhrd4
498 EUR
|
| Fairing and headlight support Ducati 999
Aluminum headlight- and dashboard support for all Ducati 999 models. Available in block or natural alloy colore. Please indicate when ordering. | Prod.Id vs15
339 EUR
|
